中文 English Français
 
Mesure & Contrôle Electrique
  - Ampèremètre / Voltmètre
  - Tableau de Fréquence
  - Analyseur Central
  - Analyseur Harmonique
  - Afficheur Digital
  - Analyseur de Multi Circuits
  - Régulateurs de Facteur de    Puissance
  - Watt-heuremètre
  - DIN Rail Watt-heuremètre
  - Transmetteurs Electrique
  - Tranduceur de Courent (TC)
  - DC Ampèremètres et          DC Voltmètres
  ----------------
Mesure&Contrôle de Process
  - Process Convertisseurs
  - Remote Terminal Unit (RTU)
  - Temperature&Humidité    Régulateurs
  - Multi Entrées Régulateurs de   Température
  ----------------
Appareilles de Protection
  - Protecteurs de   Transformatteur
  - Protecteurs de Moteur
Produit Centre
Electric Measure & Control > Tableau de Fréquence programmable
Tableau de Fréquence programmable
1.General
     The PZ series programmable frequency meters can measure electrical network frequency accurately. With 4 keys on the front panel, we can set the measurement parameters. And we can transmit the measure data with the options of analog output or digital output (RS485). With logic input or logic output, we can realize controlling other equipment remotely .
2.Technical feature
Technical parameter Value
Input Range 0~9999Hz
Nominal value AC1A, 5A (Consult us for special range)
AC100V, 220V, 380V, 450V (Consult us for special range)
CT / PT ratio Programmable
Over load Voltage: 540V (continuous), 1000V (1s);
current: 6A (continuous), 50A (1s)
Consumption each voltage, current Input < 0.5VA
Accuracy class 0.05Hz
Power Supply Range AC85~265V or DC110-350V
Consumption < 1.2W
Insulation resistance ≥ 100MΩ
Isolation 2kV/1min (RMS) supply / Input / output
Env Temperature Operation: LCD: -10℃~+45℃; LED: -10℃~+55℃
Storage: -20℃~+70℃
Humidity ≤ 93%RH, no condensation, without corrosive gas
Altitude ≤ 2500m
 
3. Output Options
OPTIONS FEATURES
Display (L) LED or LCD display, the brightness can be set
Communication (/C) RS485 (Modbus-RTU); 1 start bit, 8 data bit, 1 stop bit,
no parity, speed (1200/2400/4800/9600/19200)
Alarm output(/J) 1 passive relay (1A/30VDC, 1A/250VAC)
alarms of over voltage, low voltage and over current
The hysteresis and the delay can be set
Analog output(/M) DC4~20mA, DC0~20mA( load < 600Ω),
DC0~5V,DC1~5V( load > 1kΩ)
Number: /M, /M3 (1 or 3 analog outputs)
Logic options(/K) 4 logic inputs and 2 logic outputs
Logic Input: dry contact Input, supplied inside, optoisolator
Logic output: NO-NC contact; 1A/30VDC,5A/250VAC ( to control other equipments)
Note: /M and /K can not be chosen simultanously.
 
4 .Specification
Photo Outline Single Phase
Current Meter
96 X 96 mm PZ96-F
PZ96L-F
 
Other Size
Model Outline Types of Product
48 X 48mm PZ48-F
72 X 72 mm PZ72-F
PZ72L-F
80 X 80 mm PZ80-F
PZ80L-F
120 X 120 mm PZ42-F
PZ42L-F
 Copyright (C) 2005. Shanghai Acrel Co., Ltd All Rights Reserved